Iron-on, Stitch, Tear-A-Way
Size: 8" x 25 yd. Roll
knits, fleece, tricot, sweater knits, etc.
Instructions for use:
1. Set iron temperature for fabric type. Place fabric with the back side up on the ironing surface. For embroidery in hoop: Cut a strip of Press-'n-Hoop at least 2-1/2" longer than the hoop length.
2. Place the shiny side of Press-'n-Hoop directly to the back side of the fabric. Center Press-'n- Hoop length to assure each end will be caught in both ends of the hoop. Do not distort fabric weave or stretch fabric as you adhere the strip of Press-'n-Hoop.
3. Starting at the bottom of the strip edge, working out to the top edge, slowly press the Press-'n-Hoop to the fabric. Press 5 to 10 seconds in each area of the strip to secure the Press-'n-Hoop.